هل تغير السيرفو بتاع الانوس الى النوبيرا يحسن اداء الفرامل؟ وهل يوجد اى خطورة من دة
عرض للطباعة
هل تغير السيرفو بتاع الانوس الى النوبيرا يحسن اداء الفرامل؟ وهل يوجد اى خطورة من دة
لأ مفيش خطورة و فية كتير من زمايلنا مغيراة
و الله أعلم
انا بردو سمعت ان فى تجربه تغير الفرامل من لانوس الى نوبيرا بس غيرو ماساتر ولا سيرفو مش عارف بصراحه يا ريت لو حضرتك توضحلنا ايه ال بيتغير فى التعديل
التعديل بتاع اللانوس بيبقى تغيير الماستر الى ماستر نوبيرا و تركيب دوشم و طنابير دايو سبيرو (او فيكترا A)
MMamdouh
التكلفة الان ليست في التعديل نفسه ولكن في ثمن 4 جنوط 14 بوصه والكاوتش بتاعهم ودول يعدو اليومين دول 1600 جم لوحدهم
so is it the servo or the master?I heard that the Nubira servo is bigger therefore more oil pressure to the rear wheels.i dont know!Finally do you recommend this move or not? I was planning to buy a used one and try it as i feel that Nubira brakes are better.
thanx
the Nubira servo is 9" just like the lanos one... they both provide the same mechanical assistance so it is pointless to swap the servo...
moreover the mounting bracket of the servo in the lanos is very different and if you tried this the servo will be located much further to the front and you will have to fabricate a new push rod to operate the brakes and relocate all 4 oil pipes... and in the end you will get the same assistance so it is totally pointless (i know that because i have tried it while replacing my faulty servo and thought a nubira servo is a good idea)
the nubira brakes are better because it has bigger rotors and calipers... the lanos brake upgrade will get you same diameter rotors and similar calipers and the same brake pads
MMamdouh
well... it is not THE good idea for you right now since you haven't upgraded anything in your braking system... for me it might be interesting since i have already upgraded everything and i have nothing else to upgrade but the servo... will let you know if i got any positive feedback from this project
MMamdouh