الموضوع: coding your car keys

لقيت الموضوع ده على الFace Book فقلت أنقلهولكو يمكن حد يحتاجه

For unknown reasons the car keys may loose the code to open or close the center lock also u are unable to trigger the alarm.

Symptoms: The center lock & alarm are not responding to your remote control key also not responding to your spare key while u r sure that both keys are working fine and batteries are fine.

Solution: Get both the original and spare key and follow these steps carefully
1- Put the key in the ignition
2- Push the alarm button with your left hand and don't release the alarm button (round button with a small dot located in the dashboard)
3-Turn on the key to position 1 (The engine lamp and all other lamp will turn on )
4- Count 5 seconds then turn the key to position 0 and remove it from the ignition
5- Remember u r still pressing the alarm button, don't release yet
6- Put the key again in the ignition
7- Turn the key to position 1 once more
8- Now release the alarm button
9- Press the alarm button again and release immediately
10- The alarm lamp will flash
11- Press any button in your car remote control key (u can press several times until you hear the alarm arming)
12- Now press any key in your spare key until you hear the alarm arming again.

13- Congratulations, now the key in the ignition is recoded with the car.