الموضوع: هل ممكن اوصل التلفزيون بالداتا شو

Yes you can , just follow those steps:-

Check the back of the projector to determine the best connection to use. An S-video port is round, with four pin holes inside and
three notches around the outer edge. RGB video jacks are red, green and blue, and will deliver a superior image over S-video. The LCD TV should be equipped with both types of connection jacks so choosing a cable depends on the projector.

2
Connect an S-video cable from the LCD TV to the port on the back of the projector. The plug inserts in one direction only, so take care to align the four pins in the plug with the four holes in the port.

3
Connect an RGB video cable by matching the red, green and blue plugs to the Video OUT ports on the TV and the Video IN ports on the projector.

4
Turn on the equipment and press the "Output" button on the TV remote control until the signal appears from the projector onto the screen.