و الله يا باشا انا مكسوف منك لاني مش لاقي المانول معايا
الظاهر انه في الاب توب التاني و انا مش في مصر حاليا
لو تقدر تستني شهر يبقي قشطه
بس انا جبتلك الطريقه اللي مكتوبه من wiki answer
1. Turn the ignition switch to the ON position, marked II.
2. Press the LOCK button.
3. Turn the ignition switch to the Off position, marked I.
Do this three times!
Next, turn the ignition switch to the ON position (II) for a fourth time.
Press the LOCK button again. The door locks should now make a cycling sound, indicating that the system has entered Programming Mode.
Press the LOCK button one more time to program this remote. If you have other remotes to program, press the LOCK button on each one in turn. The door locks should make the cycling sound after you press LOCK on each remote. You may program up to three remotes, and they must all be programmed within ten seconds of each other.
Turn the ignition off and remove the key. The remotes are now programmed and may be tested.
If you've got a trunk/hatch release, hold the button for this function for a few seconds.
خلي بالك من البوزشن I & II
اتاكد ان الفيتيس علي وضع البارك
ما تربطش الحزام علشان تسمع البيب بتاعته و عند رابع بيب علي بوزشن II دوس علي زرار اللوك (اتاكد انك بتدوس علي اللوك مش الانلوك)
و علي طول حطها علي بوزيشن I (اتاكد انك بترجعه علي ال I و ليس 0)
و تكرر الخطوه دي في خلال ثانيتين (علي طول يعني) اربع مرات
في المره الرابعه العربيه بتعمل cycle للقفل و كده العربيه دخلت في البرجرامينج مود
و اي مفتاح هاتدوس علي اللوك في خلال الكام ثانيه بعل ما العربيه تعمل cycle هاتفتح العربيه و هاتقفلها
يا رب اكون قدرت اشرحلك و بالتوفيق
و انا ااكدلك ان الطريقه دي شغاله في عربيتنا في مصر لاني مجربها بنفسي (علشان ما تفتكرش او التوكيل المتخلف يقنعك انها في الموديل الامريكي )
المفضلات