إعـــــــلان

Collapse

.

,
See more
See less

خطوات عمل ايدل ليرن للاوبترا

Collapse
X
 
  • Filter
  • الوقت
  • Show
Clear All
new posts

  • خطوات عمل ايدل ليرن للاوبترا

    Idle Learn Procedure
    Whenever the battery cables, the engine control module (ECM), or the ECM fuse is disconnected or replaced, the following idle learn procedure must be performed:
    Turn the ignition ON for 5 seconds.
    Turn the ignition OFF for 5 seconds.
    Turn the ignition ON for 5 seconds.
    Start the engine in park/neutral.
    Allow the engine to run until the engine coolant is above 185° F (85°C ).
    Turn the A/C ON for 10 seconds, if equipped.
    Turn the A/C OFF for 10 seconds, if equipped.
    If the vehicle is equipped with an automatic transaxle, apply the parking brake. While pressing the brake pedal, place the transaxle in D (drive).
    Turn the A/C ON for 10 seconds, if equipped.
    Turn the A/C OFF for 10 seconds, if equipped.
    Turn the ignition OFF. The idle learn procedure is complete.

  • #2
    جميل جدا تسلم ، بس خطوات كتير اوى صعب تتحفظ من اول مرة عندى عربية اخويا اخويا بتلخبط في السلانسيه احيانا هبقى اجربه ، وبالمناسبة الميكانيكية بيقولوا الاوبترا مالهاش حساس ايدل هل الكلام ده صح ؟

    Comment

    Working...
    X