sir & vtic

[kimoboy]

Yes I know can be installed in Civic and it has been done here before in Civic 96 Hatch
QUOTE=mshamy;198558]B18C is an Integra Type R[/QUOTE]

[mshamy]

What i meant that modifications to the bases would be necessary as it is an Integra's not a Civic as the guy was hoping for:)
[
quote=kimoboy;198595]Yes I know can be installed in Civic and it has been done here before in Civic 96 Hatch
QUOTE=mshamy;198558]B18C is an Integra Type R[/quote][/quote]

[kimoboy]

Will there is Civic TR and same engine B18C, anyway this engine isn't found in Egypt, best thing is B16A with some mods and it will be ok

[mshamy]

The Civic Type R engine code is B16B with the following specs:
B16B (Type R)

• VTEC
• Found in:
  • 1997-2000 Civic Type R[EK9]
    • Displacement: 1595 cc
    • Compression: 10.8:1
    • Bore: 81mm
    • Stroke: 77.4mm
    • Rod/Stroke ratio: 1.84:1
    • Power: 185 hp (137 kW) @ 8200 rpm & 118 ft·lbf (160 N·m) @ 7500 rpm
    • Redline: 9000 rpm
    • Transmission: S4C With LSD
      • Note: This engine uses the same block as the Integra Type R, which is taller than the B16a block, but with a crank the same stroke as the b16a. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard b16.

for more details

http://en.wikipedia.org/wiki/Honda_B_engine#B16B_.28Type_R.29

Will there is Civic TR and same engine B18C, anyway this engine isn't found in Egypt, best thing is B16A with some mods and it will be ok

[kimoboy]

I know that and both engines look almost the same :)

The Civic Type R engine code is B16B with the following specs:
B16B (Type R)

• VTEC
• Found in:
  • 1997-2000 Civic Type R[EK9]
    • Displacement: 1595 cc
    • Compression: 10.8:1
    • Bore: 81mm
    • Stroke: 77.4mm
    • Rod/Stroke ratio: 1.84:1
    • Power: 185 hp (137 kW) @ 8200 rpm & 118 ft·lbf (160 N·m) @ 7500 rpm
    • Redline: 9000 rpm
    • Transmission: S4C With LSD
      • Note: This engine uses the same block as the Integra Type R, which is taller than the B16a block, but with a crank the same stroke as the b16a. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard b16.

for more details
http://en.wikipedia.org/wiki/Honda_B...B_.28Type_R.29