إعـــــــلان

Collapse

.

,
See more
See less

الموبايلات الصيني وعلاقتها بالسيارات الصيني

Collapse
X
 
  • Filter
  • الوقت
  • Show
Clear All
new posts

  • #46
    تنبيه هام من الموبيلات الصيني المجهولة (اللي بدون ماركة-لا اقصد التي تصنع في الصين تحت ماركات عالمية)

    الموبيلات دي مش مطابقة للمواصفات العالمية بخصوص الـSAR value .. (الإشعاعات اللي بتخرج من الموبيل)
    و هي متحددة عالمياً بالقيمة 2 و جميع الماركات العالمية ملتزمة بهذه القيمة..
    لكن لا يوجد اي تفاصيل عنها في دليل المستخدم الخاص بالموبيلات الصيني المجهولة ... يا ريت تاخدوا بالكم .. دي صحتكم!

    Comment


    • #47
      المشاركة الأصلية كتبت بواسطة hacker5 مشاهدة المشاركة
      ياراجل دى اوحش عربية صينى رديئة برقبة الـ 128 و الشاهين و الاكسنت و العربيات اللى زيهم
      حضرتك بتتكلم فى تفقيل؟
      ماشوفتش الفيرنا و اللانوس ؟
      و الرينو اللوجان خامتها من جوا عاملة ازاى ؟
      مش كفاية حضرتك حاطط العربيات و التليفونات فى كفة واحدة
      انتوا هاتجننوا الواحد والله
      يافندم اهدى وبراحه
      1-ال128 االي بتقول عليها لو تقفيلا زبالة فلها قطع غيار عن البقال اى مبكنيكي يشتغل فيها كذالك الاكسنت والانوس والفيرنا كل دول حاجتهم مترمية ووكلائهم موجودين حتى لو كانوا مش كويسين بس قطع الغيار على ول الشارع
      2-بلنسبة للعربيات والتليفونات الي في كفة واحده اة في كفة واحدة للمرة المليون اقرا كلامي كفة التسويق وسياسة بيع وخدمات حيااه زي مقولت قبل كدة
      2-بلنسبة للاكسنت القديم معايا والعربية زي الفل وقطع غيارها ارخص من 128 ومشوفتش عيب تقفيل عليها غير بتاع التابلوة غير كدة مافيش دي تجربتي الشخصية
      اخيرا عمرك اشتريت حاجة اوروبي او يباني اي حاجة ان شالله وكمان ولا راديوا ولا لمبة وطلع واحشة استحالة ولو حصل بتبقى حالات منفرده
      [FONT=Comic Sans MS][SIZE=5][COLOR=#665353]The worst is Not come Yet[/COLOR][/SIZE][/FONT]

      Comment


      • #48
        المشاركة الأصلية كتبت بواسطة successcre8or مشاهدة المشاركة
        تنبيه هام من الموبيلات الصيني المجهولة (اللي بدون ماركة-لا اقصد التي تصنع في الصين تحت ماركات عالمية)

        الموبيلات دي مش مطابقة للمواصفات العالمية بخصوص الـsar value .. (الإشعاعات اللي بتخرج من الموبيل)
        و هي متحددة عالمياً بالقيمة 2 و جميع الماركات العالمية ملتزمة بهذه القيمة..
        لكن لا يوجد اي تفاصيل عنها في دليل المستخدم الخاص بالموبيلات الصيني المجهولة ... يا ريت تاخدوا بالكم .. دي صحتكم!
        ++++++100000000000000000000000
        +ان هية ديه السياسة الي بتكلم عليها هناك بيعمول اي حاجة باي فلوس وهنا معندناش اي جه تحدد كفاءة المنتج او ضمانه على صحه المستهلك الكلام ده على العربيات والتليفونا والحجارة القلم
        [FONT=Comic Sans MS][SIZE=5][COLOR=#665353]The worst is Not come Yet[/COLOR][/SIZE][/FONT]

        Comment


        • #49
          المشاركة الأصلية كتبت بواسطة egyptianmafia مشاهدة المشاركة
          but how can china only the factories to say yes to someone asking them to make part a or b @ 1 le only....

          This can and did hurt the image of the chinese manufacturing.....


          A lot of people dont like chinese products because they are not a quality product and will break easily and it would be wise to replace it than to fix it

          and china is well known to making a lot of fake stuff.....if you produce product a today.....in a matter of hours...china would have replicated that product and it would be sold in egypt by 8am the next day!!!!


          Look at the chinese ipods..they clones the shape.....but try to make it last with you for a month!

          You will need to re-install/format the os of that fake ipod...they even supply you with the os for that device....

          What does that have to tell you....?????

          They know it will crash....and they supply you with the disk.....


          So why make a product that crashes??????

          معنى كده هنفضل عايشين في دايرة مغلقة...حاجة عمرها افتراضي تعبان...أستبدل وترجع تبوظ وارجع اغيرها تاني وهكذا !!!
          وبعدين معظم اللي معاهم عربيات في مصر من المستوى المتوسط يعني تحويشة عمره كلها بيحطها في عربية عايزها اقتصادية مش كل يوم طالعاله بمشكلة ولا يبقى تحت رحمة توكيل يتحكم فيه زي ما هو عايز

          الصين بتصنع وبتصدر لكل مكان في العالم .. ولكن .. " مش بنفس الجودة "


          وده مجرد رأي شخصي في الاول و في الاخر
          [CENTER][SIZE=6][B]. . . 3aysH w msh 3aysh . . . [/B][/SIZE]
          [/CENTER]

          Comment


          • #50
            الصين بتاخد بلو برنتس لسيارات الشركات الكبيره وتبتدى تصنعها وتحولها لصاج وتركب وتديها اى اسم
            والاشكال اللى مش شبه حاجه دى تبقى برضه بلوبرنتس لعربيات معروفه لكن ساعه الموديلينج او اخراج الشكل النهائى للمنج قبل التشكيل بيعملوا بعض التعديلات الصغيره جدا
            الصينى حلو مش وحش والله بس مشكلته الامان مافيش خالص خالص والتقليد طبعا
            [CENTER][SIZE=5][B][COLOR=DarkOrange]لمتابعه تصميماتى [/COLOR][/B][/SIZE]
            [SIZE=4][COLOR=DarkOrange][B][URL="http://www.facebook.com/#%21/pages/evoo-design/110847955600246?ref=ts"]Willkommen bei Facebook | Facebook[/URL][/B][/COLOR][/SIZE]
            [SIGPIC][/SIGPIC][/CENTER]

            Comment


            • #51
              المشاركة الأصلية كتبت بواسطة evoo90 مشاهدة المشاركة
              الصين بتاخد بلو برنتس لسيارات الشركات الكبيره وتبتدى تصنعها وتحولها لصاج وتركب وتديها اى اسم
              والاشكال اللى مش شبه حاجه دى تبقى برضه بلوبرنتس لعربيات معروفه لكن ساعه الموديلينج او اخراج الشكل النهائى للمنج قبل التشكيل بيعملوا بعض التعديلات الصغيره جدا
              الصينى حلو مش وحش والله بس مشكلته الامان مافيش خالص خالص والتقليد طبعا

              يعني ايه بلو برنتس ؟؟؟
              [CENTER][SIZE=6][B]. . . 3aysH w msh 3aysh . . . [/B][/SIZE]
              [/CENTER]

              Comment


              • #52
                المشاركة الأصلية كتبت بواسطة rafe3_dent مشاهدة المشاركة
                يعني ايه بلو برنتس ؟؟؟
                Blueprint - Wikipedia, the free encyclopedia


                A blueprint is a type of paper-based reproduction usually of a technical drawing, ........ing an architecture or an engineering design. More generally, the term "blueprint" has come to be used to refer to any detailed plan.

                History

                The blueprint process is essentially the cyanotype process developed by the British astronomer and photographer Sir John Herschel in 1842.[1] The photosensitive compound, a solution of ferric ammonium citrate and potassium ferricyanide, is coated onto paper. Areas of the compound exposed to strong light are converted to insoluble blue ferric ferrocyanide, or Prussian blue. The soluble chemicals are washed off with water leaving a light-stable print.
                A similar process was used to produce printing proofs for offset printing.
                Various base materials have been used for blueprints. Paper was a common choice; for more durable prints linen was sometimes used, but with time, the linen prints would shrink slightly. To combat this problem, printing on imitation vellum and, later, polyester film (Mylar) was implemented.
                [edit] Use

                For almost a century blueprint was the only low cost process available for copying drawings. Once invented, no technical development was required; the process was put to widespread use immediately, notably in shipbuilding and the manufacture of railway locomotives and rolling stock.
                The coated material ready for use has a ....f life of two days. Industrial areas would often have many independent suppliers that made blueprint coated materials to order and provided a copying service.
                The typical practice was to have a wooden frame with a spring-loaded back, similar to a picture frame with a glass front. The drawing would be traced in India ink on tracing paper or tracing cloth. Indoors, the coated paper and tracing would be loaded into the frame which was then brought out to sunlight. Exposure time varied from less than a minute to about an hour (under an overcast sky). The operator could see the blue image appear through the tracing. When ready the frame was brought indoors. The material was washed in running water to remove the unexposed coating, then dried. It gave a clearly legible copy of the drawing with a white line on dark blue background. This copy possessed unlimited resistance to light and resistance to water that was as good as the substrate.
                The diazo ........ copying process progressively took over from blueprint during the period 1935 to 1950.
                [edit] Replacements for blueprints

                Traditional blueprints have largely been replaced by more modern, less expensive printing methods and digital displays. In the early 1940s, cyanotype blueprint began to be supplanted by diazo prints or whiteprints, which have blue lines on a white background; thus these drawings are also called blue-lines or bluelines. Other comparable dye-based prints are known as blacklines.
                Diazo prints remain in use in some applications but in many cases have been replaced by Xerographic print processes similar to standard copy machine technology using toner on bond paper. More recently, designs created using Computer-Aided Design techniques may be transferred as a digital file directly to a computer printer or plotter; in some applications paper is avoided altogether and work and analysis is done directly from digital displays. Another common modern method of copying, is the use of large-format scanners, which digitize an image, and can then be printed using a large-format plotter.
                As print and display technology has advanced, the traditional term "blueprint" has continued to be used informally to refer to each type of image.
                [edit] Blueprint companies

                Although the industry has converted to the whiteprinting system, the companies have primarily stayed the same. Among the largest as of 2006 is NRI, a ReproMAX founding partner, with eight offices in New York, Boston, Philadelphia and Washington, DC, and BP Independent Reprographics, which is the result of several mergers and buyouts between Independent Blueprinting, Crown Reproductions, and The Blueprint Company[citation needed].
                With the advent in large, conglomerate, corporate entities, it is becoming increasingly difficult to find the traditional, family-owned blueprint shop. Most small to medium-size "blueprinters" are now owned by much larger corporations like American Reprographics Company. They alone own over 235 print shops in the US and Canada.[2]
                However, there are still some truly independent shops. Among them are University Reprographics in Seattle[citation needed], and Bill's Blueprint in Everett, Washington.[3]
                A similar network has been built up as a connection of independent reprographers, as members of ReproMAX. As a result, ReproMAX has grown to be the largest association of reprographics companies, with over 230 current network partners in North America and Western Europe. [4] The electronic planroom and ........ management solution for ReproMAX is available as ReproMAX/DFS.

                Comment


                • #53
                  المشاركة الأصلية كتبت بواسطة rafe3_dent مشاهدة المشاركة
                  يعني ايه بلو برنتس ؟؟؟
                  ده مثلا اسمه بلوبرنت للبى ام

                  ده بتاع الالنترا


                  اى حاجه سواء عربيات طيارات مبانى بيتعملها ده وعباره عن رسم العمل المراد صنعه من جميع الجهات وبياخدوا الـ3 مساقط دول وبيتحطوا على برنامج 3dsmax او اى برنامج تجسيم ورسم ثلاثى اخر وببعض العمليات والشغل على البرنامج ده بيتحول الرسم ده لشكل مجسم كامل ممكن تبصله من اى جنب او اى مكان ممكن تدخل جواه وممكن تحركه وممكن وممكن
                  المشكله كلها ان الصين مافيهاش مصممين عندهم افكار جديده فبياخدوا المخططات دى ويشتغلوا عليا وممكن يعدلوا بس فيها
                  وكمان ماتنساش ان المخطط ده ماكانش كده فى اول تصميم العربيه ده اتعمل اى كلام وبعدين جسموها وجربوها على برنامج بيقيس الايرودينامك وتباتها و و و
                  وقعدوا يعدلوا فيها لغايه ماخرجت كده
                  الصين مابتعملش ده بتاخد على الجاهز وتصنع

                  [CENTER][SIZE=5][B][COLOR=DarkOrange]لمتابعه تصميماتى [/COLOR][/B][/SIZE]
                  [SIZE=4][COLOR=DarkOrange][B][URL="http://www.facebook.com/#%21/pages/evoo-design/110847955600246?ref=ts"]Willkommen bei Facebook | Facebook[/URL][/B][/COLOR][/SIZE]
                  [SIGPIC][/SIGPIC][/CENTER]

                  Comment


                  • #54
                    كلامك مظبوط

                    Comment


                    • #55
                      المشاركة الأصلية كتبت بواسطة evoo90 مشاهدة المشاركة
                      ده مثلا اسمه بلوبرنت للبى ام

                      ده بتاع الالنترا


                      اى حاجه سواء عربيات طيارات مبانى بيتعملها ده وعباره عن رسم العمل المراد صنعه من جميع الجهات وبياخدوا الـ3 مساقط دول وبيتحطوا على برنامج 3dsmax او اى برنامج تجسيم ورسم ثلاثى اخر وببعض العمليات والشغل على البرنامج ده بيتحول الرسم ده لشكل مجسم كامل ممكن تبصله من اى جنب او اى مكان ممكن تدخل جواه وممكن تحركه وممكن وممكن
                      المشكله كلها ان الصين مافيهاش مصممين عندهم افكار جديده فبياخدوا المخططات دى ويشتغلوا عليا وممكن يعدلوا بس فيها
                      وكمان ماتنساش ان المخطط ده ماكانش كده فى اول تصميم العربيه ده اتعمل اى كلام وبعدين جسموها وجربوها على برنامج بيقيس الايرودينامك وتباتها و و و
                      وقعدوا يعدلوا فيها لغايه ماخرجت كده
                      الصين مابتعملش ده بتاخد على الجاهز وتصنع

                      شكرا على التوضيح (اصلي مليش في حاجات ال designs .. شغلنا سنان وبس هههه)
                      [CENTER][SIZE=6][B]. . . 3aysH w msh 3aysh . . . [/B][/SIZE]
                      [/CENTER]

                      Comment

                      Working...
                      X