إعـــــــلان

**SHNORY** · 31-03-2010, 10:52 PM

ودي طريقه تدخيل الكود
علشان مبقاش حارمكم من حاجه

Q. How do I enter the MEP unlock code to my BlackBerry phone?
A. Below are step-by-step instructions (follow the guide best suited for your model).
BlackBerry Curve, 8300, 8310, 8320, 8800, 8820, 8900, Bold 9000
1. Insert a non accepted SIM card into the phone and switch it on
2. Turn off the wireless connections by going to the main Menu -> go to 'Manage Connections' -> select 'Turn all connections off'
3. Go back to the main Menu
4. Go to Options
5. Go to Advanced Options
6. Go to SIM Card
7. Type: mepd (you will not see .... appear on screen while typing)
8. Type: mep then press the ALT button and number 2 key (so that you get: mep2) (you will not see the .... appear on screen while typing)
9. It will say "Enter Network MEP Code, then type in the unlock code, and press in the trackball to confirm
10. Phone will say "Code accepted"
11. Switch the phone off and back on again
12. Turn the wireless connections back on by going to the main Menu -> go to 'Manage Connections' -> select 'Restore connections'
13. You will see at the top of your screen the message "Searching..."
14. After 5-10 seconds your network signal will appear
15. Press the back button until you get to the main screen
16. Your phone is now unlocked and ready to make and receive calls
Here is a video tutorial on how to enter the unlock code to your phone:

BlackBerry Storm 9500
AS ITS A TOUCH SCREEN PHONE PLEASE TYPE CAREFULLY!
1. Insert a non accepted SIM card into the phone and switch it on
2. Turn off the wireless connections by going to the main Menu -> scroll down to Manage Connections -> click on 'Turn all connections off'
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Press the Menu button and select 'Show Keyboard'
7. Type: meppd (you will not be able to see this on screen while typing it in)
8. A lock menu will show
9. Type: mepp2 -- to get the number 2, press the numbers key and all numbers will show up (you will not be able to see this on screen while typing it in)
10. Now it will say "Enter Network MEP Code"
11. Enter the unlock code, and press the enter key
12. The phone will display "Code accepted."
13. Switch your phone off then back on again
14. Turn the wireless connections back on by going to the main Menu -> go to 'Manage Connections' -> click on 'Restore connections'
15. You will see at the top of your screen the message "Searching..."
16. After 5-10 seconds your network signal will appear
17. Press the back button until you get to the main screen
18. Your phone is now unlocked and ready to make and receive calls
Here is a video tutorial on how to enter the unlock code to your phone:

BlackBerry 8700
Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.

BlackBerry 8800
........* You must have a SIM card in your phone to complete these steps (Can be active or inactive) ........*
1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any .... appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any .... appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code and press in the track wheel / jog dial to confirm
6 - Your phone is now unlocked

BlackBerry 8100 Pearl
1. Go to Menu, then Options then Advanced Options then Sim Card
2. In the SIM Card menu, hold down the shift (it has # on it known as the CAP key) (right of the zero key) and press meppd
3. You will see the unlocking level screen (Network, Network Subset, Service Provider, Corporate). The Network lock will say Active, meaning its locked
4. Now hold the ALT key (key with arrow going up and down) and type mepp2
5. A window will appear on screen showing "Enter Network MEP code (255 left)"
5. Now enter the unlock code and press in the trackball
6. It will say "Code accepted"
7. The unlocking level screen will say "Network Disabled"
8. Now restart your phone, and your ready to go

BlackBerry 8100 (Vodafone Australia)
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS
This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below
1. Take note of the unlocking code shown above
2. Insert a Non-Vodafone Australia working SIM card.
3. Ensure the phone is charged and then switch the phone on.
4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)
5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)
6. Select “Turn Wireless Off”
7. Select “Settings” Menu , then go to Advanced Options > SIM Card
8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter.
10. Reset the phone by pulling the battery
11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)
Please Note:
If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.
To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.
FAQ:
Question: My phone asks to enter a PIN number
Answer: For SIM cards with PIN ENABLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.
Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.
Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly – Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

All other BlackBerry models
1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked

shnory

**nabaster** · 31-03-2010, 10:57 PM

حبيب جلبي ونعمه

ربنا يجعله في ميزان حسناتك يا شنوري بيك

A.Yakout

**SHNORY** · 31-03-2010, 11:30 PM

المشاركة الأصلية كتبت بواسطة nabaster مشاهدة المشاركة

حبيب جلبي ونعمه :f_eyeb1[1]:

ربنا يجعله في ميزان حسناتك يا شنوري بيك

a.yakout

يا حبيبي ربنا يخليك علي كلامك الجميل ده

المشاركة الأصلية كتبت بواسطة abd_el_7amid مشاهدة المشاركة

السلام عليكم
اولا 1000 شكر
ثانيا الحمد لله ان لاقيت حد بيفهم فى البلاك بيرى
معلش ليه شوية اسئلة
ايه اللى يميز البلاك بيرى عن غيره؟؟؟؟ انا سمعت انك ممكن تشوف ميلك اوف لاين وكمان الماسينجر والخرائط ستالايت اوف لاين وانه لوحد تانى معاه بلاك بيرى ممكن نتكلم ستالايت ودا هيبقى طبعا ارخص من الدولى مثلا... انا بصراحة بسمع وبسمع لكن فين الكلام الاكيد ... مش عارف
للعلم انا معايا htc القيصر
وجزاك الله خير

والله كان نفسي افيدك يا باشا
بس انا مش بتعامل مع اي ابليكيشن جوه موبايل
انا بتعامل مع الاوبريتينج سيستم نفسه
سواء اعاده برمجه او انلوك
اللي يقدر يفيد حضرتك في الموضوع ده يوزر يكون محترف بلاك بيري من حيث التعامل مع امكانياته
والاوبشن الداخلي بتاعه
ونورت موضوعي

**brown-eyes** · 04-04-2010, 07:28 PM

المشاركة الأصلية كتبت بواسطة abd_el_7amid مشاهدة المشاركة

السلام عليكم
اولا 1000 شكر
ثانيا الحمد لله ان لاقيت حد بيفهم فى البلاك بيرى
معلش ليه شوية اسئلة
ايه اللى يميز البلاك بيرى عن غيره؟؟؟؟ انا سمعت انك ممكن تشوف ميلك اوف لاين وكمان الماسينجر والخرائط ستالايت اوف لاين وانه لوحد تانى معاه بلاك بيرى ممكن نتكلم ستالايت ودا هيبقى طبعا ارخص من الدولى مثلا... انا بصراحة بسمع وبسمع لكن فين الكلام الاكيد ... مش عارف
للعلم انا معايا htc القيصر
وجزاك الله خير

wait me to tell u some tips

**max_ziro** · 04-04-2010, 11:56 PM

ولله يا باشا تسلم ايدك يارتنى كان عندى بلاك بيرى عشان استخدم المواضيع دى ..

**yoko** · 10-04-2010, 10:40 PM

شنوري باشا الجهاز ٨٩٠٠
السيريال
357238038608167
mep-09070-001

**SHNORY** · 10-04-2010, 10:55 PM

المشاركة الأصلية كتبت بواسطة yoko مشاهدة المشاركة

شنوري باشا الجهاز ٨٩٠٠
السيريال
357238038608167
mep-09070-001

اتفضل يا باشا

IMEI: 357238038608167

MEP: mep-09070-001

MEP2(Network): 3095332298423957

MEP3(Network Subset): 7438878317027268

MEP4(Service Provider): 3058725633817326

MEP5(Corporate): 7346042796678887

ودي الطريقه

BlackBerry Curve, 8300, 8310, 8320, 8800, 8820, 8900, Bold 9000
1. Insert a non accepted SIM card into the phone and switch it on
2. Turn off the wireless connections by going to the main Menu -> go to 'Manage Connections' -> select 'Turn all connections off'
3. Go back to the main Menu
4. Go to Options
5. Go to Advanced Options
6. Go to SIM Card
7. Type: mepd (you will not see .... appear on screen while typing)
8. Type: mep then press the ALT button and number 2 key (so that you get: mep2) (you will not see the .... appear on screen while typing)
9. It will say "Enter Network MEP Code, then type in the unlock code, and press in the trackball to confirm
10. Phone will say "Code accepted"
11. Switch the phone off and back on again
12. Turn the wireless connections back on by going to the main Menu -> go to 'Manage Connections' -> select 'Restore connections'
13. You will see at the top of your screen the message "Searching..."
14. After 5-10 seconds your network signal will appear
15. Press the back button until you get to the main screen
16. Your phone is now unlocked and ready to make and receive calls
جرب وانا معاك

**yoko** · 10-04-2010, 11:19 PM

شنوري باشا زعيم الموبيلات في مصر التجربة ناجحة ١٠٠٪
والصورة أهي

**SHNORY** · 10-04-2010, 11:21 PM

المشاركة الأصلية كتبت بواسطة yoko مشاهدة المشاركة

شنوري باشا زعيم الموبيلات في مصر التجربة ناجحة ١٠٠٪
والصورة أهي

الله ينور عليك يا باشا انك عملته
وانا تحت امرك في اي حاجه

كده فاضل 4 يا رجاله

Comment

Comment

Comment

Comment

Comment

إعـــــــلان

.

لاعضاء نايل موتورز فقط فك 5 اجهزه بلاك بيري هديه مني ليكم

لاعضاء نايل موتورز فقط فك 5 اجهزه بلاك بيري هديه مني ليكم

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment