If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
خساااااااااااااااااااره متور الفابريقه
لو عاوز اتوماتيك بيع واشتري حاجه اتوماتيك
في بي واي دي او فيرنا
ولو خايف تخسر فيها, هتعوض ان شاء الله في فرق سعر العربيه الجديده لما تجيبها كسر زيرو
خساااااااااااااااااااره متور الفابريقه
لو عاوز اتوماتيك بيع واشتري حاجه اتوماتيك
في بي واي دي او فيرنا
ولو خايف تخسر فيها, هتعوض ان شاء الله في فرق سعر العربيه الجديده لما تجيبها كسر زيرو
الف شكر علي اهتمامك يا باشا بس المشكله اني اني هعمل عمليه في رحلي الشمال رباط صليبي والدبرياج بيتعبني من دلوقتي وانا لسه جايب العربيه قسط من شهر 8 /2014 ومظنش ينقع ابعها وعليها حظر بيع
الف شكر علي اهتمامك يا باشا بس المشكله اني اني هعمل عمليه في رحلي الشمال رباط صليبي والدبرياج بيتعبني من دلوقتي وانا لسه جايب العربيه قسط من شهر 8 /2014 ومظنش ينقع ابعها وعليها حظر بيع
الف سلامه عليك وربنا يشفيك ان شاء الله
ممكن تسئل علي تركيب فتيس اتوماتيك على الماكينه بتاعة الفابريقه
بس يكون حد بيفهم علشان يقولك ايه اللى هينفع يركب عليها وبعدين يركبه صح
الف سلامه عليك وربنا يشفيك ان شاء الله
ممكن تسئل علي تركيب فتيس اتوماتيك على الماكينه بتاعة الفابريقه
بس يكون حد بيفهم علشان يقولك ايه اللى هينفع يركب عليها وبعدين يركبه صح
شكرا لاهتمامك
وانا هسال واكتب انا عملت ايه ان شاء الله علشان الكل يستفيد
ماتور لانسر شارك 1500cc بالفتيس و الكنترول
ماتور تويوتا كرولا 1500cc بالفتيس و الكنترول
ماتور لانسر بوما 1600cc بالفتيس و الكنترول
كلة بيركب من غير اي تعديل في قواعد العربية و الاسعار في حدود من 5-8 الاف جنية
المشكلة في الكنسول و عدادات الاتوماتك بتاعت الامجراند --- و علي ما اعتقد انها موجودة عند بعض تجار الاستعمال في الحرفيين
The 1NZ-FE is a 1.5 L (1497 cc) conventional Otto-cycle variant of the 1NZ-FXE with VVT-i.
It retains the same bore and stroke, but the compression ratio is lowered to 10.5:1. Output is 81,2 kW (109 hp) at 6000 rpm with 141 Nm (103 lb·ft) of torque at 4200 rpm. The redline is 6400 rpm.
Applications:
محرك الكورولا للجيلي ايمجراند 1.8 و ممكن طبعا لل 1.5
1ZZ-FE
1ZZ-FE
The 1ZZ-FE is a 1.8 L (1794 cc, 225 lb) version built in Buffalo, West Virginia. Its production in Cambridge, Ontario was discontinued in December 2007. Bore is 79 mm and stroke is 91.5 mm. Compression ratio is 10.0:1. Output is between 120 hp (89 kW) at 5600 rpm with 122 ft·lb (165 N·m) of torque at 4400 rpm, and 143 hp (105 kW) at 6400 rpm with 125.8 ft·lb (170.6 N·m) of torque at 4200 rpm. It uses multi-point fuel injection, has VVT-i and features fracture-split forged powder metal connecting rods, a one-piece cast camshaft, and either a cast aluminum intake manifold or a molded plastic one.[3]
A bolt-on TRD supercharger kit is available on the 2003–2004 Corolla, Matrix, and Vibe. The bolt-on TRD supercharger kit can also run on other vehicles with the non VVT-i or VVT-i versions of the 1ZZ-FE. Custom fabrications are needed for those vehicles.
Applications:
Toyota Corolla CE/LE/S/VE, Fielder, Runx (Japan), Altis (Asia)
Toyota announced a voluntary recall of 2005 to 2008 Toyota Corollas and Matrixes equipped with 1ZZ-FE engines. The issue involves the engine control module, and includes the potential for it to develop a crack on the module's circuit board, which can result in the car not starting, the transmission shifting harshly, or the engine stalling. Additionally, Pontiac announced a voluntary recall of Pontiac Vibes from years 2005 to 2008 for the same issue. 1ZZ-FED
The 1ZZ-FED is similar to the 1ZZ-FE but is built in Shimoyama, Japan. Output is 140 hp (104 kW) at 6400 rpm with 126 ft·lb (171 N·m) of torque at 4200 rpm. It uses MFI fuel injection, VVT-i and light weight, cast rods.
Applications:
The 3ZZ-FE is a 1.6 L (1598 cc) incarnation built in Japan. It is found in the Asian Toyota Corolla Altis which is available in countries such as Singapore, Malaysia, Philippines, Thailand and Taiwan and in the Toyota Corolla sedan sold in Sri Lanka. In South Africa the motor can be found in the RunX 160 and Corolla 160. The entire exterior design and chassis is the same as the American Corolla. Bore is 79.0 mm and the stroke is 81.5 mm. Max. output is 109 hp (81 kW) @ 6000 rpm. Max. torque is 110 lb·ft (150 Nm) @ 3800 rpm. Features SMP pistons v/s Toyota made in 1ZZ-FE engine. The preferred engine oil is 5W30 API grade SL/SM.
Applications:
The 4ZZ-FE is a 1.4 L (1398 cc) version. Bore is 79.0 mm and stroke is 71.3 mm. Output is 95 hp (71 kW) at 6000 rpm with 96 ft·lb (130 N·m) of torque at 4400 rpm.
Applications:
دي بردو مجموعة من محركات الكورولا بس مش متاكد اذا كانت تنفع للايمجراند !
1ZR
1ZR-FE
The Toyota 1ZR-FE is a DOHC, 16-valve, 1.6 L (1598cc) engine equipped with dual VVT-i. This engine is available with either manual gearbox (5 Speed) or a "multi-mode" manual transmission (MM-T 5 Speed). For the Corolla Altis, the available transmission options are the manual gearbox (6 speed) or a 4 speed gate type automatic transmission. Output for this engine is rated at 124 hp (92 kW) at 6000 rpm and 116 lb·ft (157 N·m) of torque at 5200 rpm net.
Specifications
The Toyota 1ZR-FAE is a DOHC, 16-valve, 1.6 L (1,598 cc) engine also equipped with Dual VVT-i and Valvematic. Output for this engine is rated at 132 hp (97 kW) at 6400 rpm and 118 lb·ft (160 N·m) of torque at 4400 rpm for the Avensis. Compression ratio has been increased to 10.7:1, red line is at 6600 rpm. Valvematic varies the intake valve lift between 1mm and 11mm according to load and RPM.[1]
Applications
The Toyota 2ZR-FE is a DOHC, 16-valve, 1.8 L(1798 cc)[2] engine also equipped with Dual VVT-i. This new engine is now replacing the 1ZZ-FE engine in most applications. Output for this engine is rated at 104 kW (140 hp) at 6000 rpm and 174 N·m (128 lb·ft) of torque at 4400 rpm for the Corolla, Matrix, and Vibe and 95 kW (128 hp) and 171 N·m (126 lb·ft) of torque in the Scion xD.
Specifications
Engine Type : In-Line 4-cylinder DOHC 16-valve
Bore × Stroke = 80.5 mm × 88.3 mm (3.169 in × 3.476 in)
Compression Ratio : 10.0:1
Weight : 97 kg (214 lb), without fuel
15.2 km/L (43 mpg-imp; 36 mpg-US) fuel consumption (10-15 Australia & New Zealand test cycle)
Lotus Elise Model Year >= 2012 with Magnuson R900 supercharger (217bhp)
2ZR-FAE
The Toyota 2ZR-FAE is a DOHC, 16-valve, 1.8 L (1797 cc) this engine adopts the Valvematic system. This all-new engine is progressively replacing the 1ZZ-FED and 2ZR-FE engine in most applications. Variants of this engine produce 104–110 kW (139–148 bhp) and 171–175 N·m (126–129 lbf·ft) of torque. Compression ratio is 10.5:1 and redline is at 6600 rpm. The engine consumes 5–10% less fuel than the 2ZR-FE depending on the application.[3]
Applications
The Toyota 2ZR-FXE is a 1.8 L (1798 cc) Atkinson cycle variant of the 2ZR-FE.[4] It has the same bore and stroke, but the compression ratio is increased to 13.0:1, and the inlet valve closing is retarded. The net result is that the engine has a greater effective expansion than compression. Output is producing 73 kW (98 hp) and 142 N·m (105 lbf·ft) of torque, paired with electric motor/generators in the hybrid drive system; together the engine and electric motors produce up to 100 kW (134 hp) and 207 N·m (153 lbf·ft)pm. Thermal efficiency is about 38%.[5]
Applications
The 3ZR-FAE is a 2.0 L (1,987cc) DOHC, 16-valve engine that was first used in 2007. It is Toyota's first engine with the Valvematic variable lift intake system.
Specifications
Engine type : In-Line 4-cylinder DOHC 16-valve
Bore x Stroke : 80.5 × 97.6 mm
Compression Ratio : 10.0:1
158 PS (155 hp/116 kW) at 6200 rpm
144 lb·ft (195 N·m) of torque 4400 rpm
33 mpg
14.2 km/L fuel consumption (10-15 Japanese test cycle)
Specification is similar to 2ZR-FXE & a region-coded model due to various reasons.[citation needed] Production
The 1.6L and 1.8L ZR engines are built in Tianjin FAW Toyota Engine Co., Ltd. (TFTE) Plant No. 2, beginning in April 2007 [8] and in the West Virginia Plant for Corolla's production in the United States and Canada.[9]
Comment