هيا محصلتش معايا بس انا شوفت post ده ممكن يساعد تشيك علي كونترول يونيت في الشنطه تحت الاستبن تفصل البور والاسلاك وبعدين تشغل العربيه لمده دقيقه والاسلاك مفصوله تشيل المفتاح وجرب وصلهم تاني او اتنين سينسور باظو
Hi,
The PDC controller is in the boot, if you remove the spare wheel and the lining for the boot.
Under there is a black foam cover which you can just lift up, you'll see the PDC controller (black box with 4 cables connected into it.
Power off the igition (remove key) and then remove all cables from the controller.
Then start/stop the car with it disconnected for a minute or so.
Then again power off the igition (remove key) and then reconnect all cables to the controller.
Then try the car again and see if the controller resets and comes online.
If it doesn't that usually means its either the controller thats failed, or 2 or more PDC sensors have failed.
Once 2 or more sensors fail the controller shutdowns and you'll also get the PDC Failure messages.
If you have the car in reverse to activate the PDC and then put your ear right up to each sensor you should hear a "clicking", do this on all front and rear sensors.
If you hear nothing or its very slight on some sensors then they need replacing, some people advise spraying WD40 into the sensor etc... personally it never worked for me.
If you have INPA/DIS or anyone you know has it plug it into the car to test the PDC, if will show what ones are working.
المفضلات